5 Key Takeaways on the Road to Dominating Fencing

A Guide on How to Install Split Rail Fence Correctly

One of the early methods in fencing is the split rail fence, it is typical used to fence farmhouses. Anyone who is living near the forest should learn the procedure on how to install split rail fence. This is for the reason that the enclosure is mostly found in forested areas because it makes most of the materials in wooden area.

Despite the fact that this method is out of date, it is still appealing and attractive primarily to those who still keep with the tradition. This kind of method is inexpensive, simple and durable. The installation is pretty simple and only uses basic tools such as a pair of gloves, helmet, axe, and wedge. The very important thing about this method is that you can recycle your inoperative timbers and make it into a useful and beautiful enclosure.

Now before you install it, of course you need first to establish where you will put the fence. Be sure that the area is a safe one to excavate. Also, see to it that there is no gas, water or power line beneath the area you are supposed to dig up holes. The lines can be risky to the workforce and to those around the area.

After choosing the perfect area to install your fence, measure the perimeter of the area you want to enclose. Moreover, the boundary line should be marked in order to avoid confusion. You can use a ground stakes and make a clear outline by tying a guideline from one corner to following corners. In this way, you can guarantee that you can have a clear guide and a well-stretched line.

After making a guideline, put all the corner posts. Dig up an appropriate hole to place the split posts. To be exact, it should accommodate a third of the total length of the post. After that put the concrete to an approximately 24 inches deep, then let it rest for at least 72 hours. Make sure that you placed your posts with about 10 to 12 feet distance from each other. After you placed the post securely, make sure that the posts are positioned well and are in straight line.

Then, place a guide wire and make sure the posts are vertically upright. The reason of placing a wire is to determine the accuracy of the line both in smoothness and dimension.
Measure the length of the posts and make sure that the sizes are similar as possible to maintain a spruce look. Then, split the post from top to bottom with the use of axe or wedge.

The last step is to join the split post and rail together by using hammer and drive nails. The place will not only keep the place beautiful within, but it will also serve as a strong protection from any destruction.

The 5 Rules of Services And How Learn More

5 Key Takeaways on the Road to Dominating Fencing

admin Author